Mobile Technician II
Company: Penske Truck Leasing
Location: Phoenix
Posted on: October 11, 2024
|
|
Job Description:
1041 N. 75th Ave Phoenix AZ 85043 Exciting New Road Tech
Program! Position Summary: Penske Mobile Technician II will
generally assist in the repair and diagnosis of major components or
remove/replace major components at the direction of the PFM Asset
Supervisor. Expectations include the ability to perform preventive
maintenance (PM) service and to diagnose and repair the following
with little or no supervision: Clutches, PTO Systems, Electric
Systems, Hydraulic/Air Brake systems, Heating/Air Conditioning
Systems, and Instruments and Gauges. **This position is managed by
our corporate team, and the Mobile Tech II will not work on
equipment in a Penske facility. Major Responsibilities: Demonstrate
proficiency in the repair and diagnosis of: Engines (gas and
diesel); Power train to include differentials, transmissions,
clutches, drive shafts, PTO's and wheel ends; Electrical systems
including starters and alternators; HVAC systems; Steering systems;
Electronics to include ECM's, ECU's, sensors, etc.; Engine bolt on
items such as turbos, fan clutches, injectors, cooling system,
etc.; Brake systems including ABS; and Suspension systems (spring
and air) Perform mechanical and general appearance reconditioning
of equipment for "trade-ins" and prepare new equipment for
delivery. Identify and determine parts required for repair of
disassembled units Perform all levels of preventive maintenance
services Perform duties with little or no supervision in a timely
and efficient manner Identify warrantable repairs and document on
repair order Maintain on-site work area appearance, safety, and
environmental compliance. Comply with all Penske and Customer work
requirements Road test Vehicles when necessary to diagnose
malfunctions or to ensure that they are working properly. Use hand
tools such as screwdrivers, pliers, wrenches, pressure gauges, and
precision instruments, as well as power tools such as pneumatic
wrenches, welding equipment, and jacks and hoists. Inspect brake
systems, steering mechanisms, wheel bearings, and other important
parts to ensure that they are in proper operating condition.
Perform routine maintenance such as changing oil, checking
batteries, and lubricating equipment and machinery. Adjust and
replace brakes, tighten bolts and screws, and reassemble equipment.
Inspect, test, and listen to defective equipment to diagnose
malfunctions, using test instruments such as handheld computers,
motor analyzers, chassis charts, and pressure gauges. Examine and
adjust protective guards, loose bolts, and specified safety
devices. Inspect and verify dimensions and clearances of parts to
ensure conformance to factory specifications. Specialize in
repairing and troubleshooting of major components such as engine,
transmissions and differentials, to include replacing complete
assemblies, turbochargers, fuel system components etc. Order,
receive, and charge out parts. Maintain control of parts inventory,
including cores, via cycle counts and proper inventory management.
Serve as primary customer contact for day-to-day customer needs,
and escalate as required to sales/operations management. Manage
tire and wheels, both on equipment via inspections and in
inventory. - - Follow Penske safety practices at all times. Other
projects and tasks as assigned by supervisor Why Penske is for You:
--- Competitive starting salary --- Shift Premiums - 2 nd Shift
($2.50) 3 rd Shift ($3.50) Weekends ($2.00) --- Career stability
--- Opportunity for growth --- Excellent benefits, including lots
of time off --- Strong, well-rounded training on a variety of OEM
equipment (Penske's Technician Certification Program is certified
as a Continuing Automotive Service Education provider) --- Advanced
vehicle maintenance technology --- Location and schedule
flexibility Pay: $29.53/Hour Qualifications: 2-4 years practical
experience with tractor trailer maintenance required High school
diploma or equivalent required Vocational/Technical or
certification preferred Specialized training in the repair and
replacement of vehicle components preferred Proficiency in the use
of shop tools required Current CDL license with air brake
certification required, willingness to acquire CDL if you do not
have one. DOT medical card and/or ability to obtain DOT medical
card prior to commencing work. Ability to read a map. Ability to
operate a 26,000 non-articulated vehicle safely and professionally.
Ability to utilize mapping tools (e.g. Waze) Self starter who is
able to work with minimal direct oversight. Basic computer skills
required for data entry into maintenance systems. Ability to work
in non-climate controlled conditions required The associate will be
required to understand and comply with specific instructions,
guidelines, rules, regulations, or other information established by
Penske management The associate must be able to perform all work
adhering to DOT, OSHA, and all Penske safety and maintenance
policies; including but not limited to the correct selection and
use of appropriate tools, PPE, machine guarding, and established
best safety practice. Regular, predictable, full attendance is an
essential function of the job As this position requires driving
Penske and customer vehicles, it is regulated by the DOT and
requires a current driver qualification file to be maintained as
required by the role. The driver qualification file includes: an
annual motor vehicle records (MVR) check, a successfully completed
DOT Physical, and Safety Performance History records request from
prior employers in the last 3 years. Additionally, CDL holders will
have a DOT Drug Screening within 30 days of start and subject to a
FMCSA Clearinghouse review. Willingness to travel as necessary,
work the required schedule, work at the specific location required,
complete Penske employment application, submit to a background
investigation (to include past employment, education, and criminal
history) and drug screening are required Physical Requirements: The
physical and mental demands described here are representative of
those that must be met by an associate to successfully perform the
essential functions of this job. Reasonable accommodations may be
made to enable individuals with disabilities to perform the
essential functions. --- While performing the duties of this job,
the associate will be required to move frequently, stand, walk,
climb, bend, and sit for extended length of time throughout their
scheduled working period. --- The associate is required to use
their hands on a routine and daily basis to grasp, reach, touch,
handle, feel, and/or otherwise operate required tools or controls.
--- The associate must be able to work safely at heights using
applicable ladders and elevated working platforms. --- The
associate must be able to safely work in all weather conditions.
--- Given the frequent movement of large trucks through the
workplace, the associate must be able to see and hear in order to
safely navigate the work environment. --- The associate must be
able to regularly lift and/or move up to 50lbs/23kg and
occasionally lift and/or move up to 100lbs/45kg. Penske is an Equal
Opportunity Employer. Job Category: Vehicle
Maintenance/Mechanics/Technicians Job Function: Truck Maintenance
Job Family: Vehicle Maintenance Address: 1041 N 75th Ave (PTL)
Primary Location: US-AZ-Phoenix Employer: Penske Truck Leasing Co.,
L.P. Req ID: 2412263 --s-p-m1-- By applying, you consent to your
information being transmitted by Monster to the Employer, as data
controller, through the Employer's data processor SonicJobs. See
Penske Privacy Policy at
https://www.gopenske.com/privacy/job-applicant-privacy-notice and
SonicJobs Privacy Policy at
https://www.sonicjobs.com/us/privacy-policy and Terms of Use at
https://www.sonicjobs.com/us/terms-conditions
Keywords: Penske Truck Leasing, Sun City , Mobile Technician II, IT / Software / Systems , Phoenix, Arizona
Click
here to apply!
|